/ / Origami Scalia

Origami Scalia

Skalyariya-origami

Scalarians are the most common aquarium fish. Origami scaling is done according to the following scheme:

1. Fold diagonally and straighten.

2. Fold and straighten the other diagonal.

3. Turn over the sheet.

4. Fold in half and straighten.

5. Fold the sheet in half.

6. Fold the corners of the top layer up and repeat the steps from the back.

7. Fold the lines to the right and flatten.

8. Turn over the origami figure.

9. Fold to the right and flatten.

10. Fold the dashed lines inward and bend the corner up. Repeat the action from the rear.

11. Pull out the paper layers on the front and back.

12. Fold the top down.

13. Fold and straighten the corner.

14. Bend the corner inward.

15. Fold to the right and smooth.

16. Fold the dashed lines inward.

17. Lift the corner and fold to the left.

18. Repeat steps 15-17 on the right side.

19. Turn over the figure.

20. Fold in half.

21. Fold to the right and flatten.

22. Put it back to the right and flatten it.

23. Go to the left.

24. Fold to the left and flatten.

25. Lift the corner and fold to the left.

26. Repeat steps 21-25 on the right side.

27. Flip through the layers as shown in the picture at the front and back.

28. Turn the origami figure.

29. Turn the first and third layer of paper down on the lines shown in the figure. These are the fins of origami scalyaria.

30. Fold along the lines in front and behind.

31. Turn the middle layer up.

32. Fold in and repeat from behind.

33. Turn the line down.

34. Open the layer down and repeat from behind.

35. Fold and straighten front and back.

36. Fold in and repeat from behind.

37. Follow the lines shown in the figure.

38. Pull the inner layer out.

39. Repeat steps 37-38 at the rear.

40. Fold up.

41. Make folds along the lines and fold them inward.

42. Make bends along the lines shown in the origami diagram.

43. Fold inside.

44. Fold in front and behind.

45. Fold left in front and behind.

46. ​​Make folds, giving shape to the eye and fin in front and back.

47. Give a final look to the eye and fin. Repeat steps from the rear.

48. Fold along the lines in front and behind.

49. Fold inward from above, shaping the upper fin. Repeat from behind. From below make a "rabbit ear", bending the lower fins. Repeat from behind.

50. Make folds along the lines, giving the final corrugated shape to the fins of the origami scaly.

51. Origami scaly is ready.

Pay attention to: