/ / Barracuda origami

Barracuda origami

Barrakuda-origami

Barracuda is a sea pike. It lives in tropical and subtropical waters. Barracuda origami is made according to this scheme:

1. Fold diagonally and straighten.

2. Turn over the sheet.

3. Fold the corners to the center.

4. Bend to the left.

5. Fold the corner to the right.

6. Decline.

7. Fold the corners.

8. Fold to the right.

9. Decouple completely.

10. Fold in half.

11. Fold to the right.

12. Go to the left.

13. Fold up and repeat from behind.

14. Fold down front and back.

15. Fold down front and back.

16. Bend downward so that point A passes along line A-B.

17. Bend to the left, combining point C with point D.

18. Decline.

19. Flex to point A on line D-B, and point B on line B-C.

20. Decline.

21. Fold inside.

22. Fold the lines up and repeat from behind.

23. Fold so that point A lies on line A-B. Repeat from behind.

24. Expand the front and back.

25. Fold down front and back.

26. Fold left in front and behind.

27. Fold and straighten.

28. Fold left in front and behind.

29. Fold to the right and repeat from behind.

30. Go up. Repeat from the back side.

31. Pull out the layer and repeat from behind.

32. Fold down front and back.

33. Pull out the layer so that point A coincides with point B. Repeat from behind.

34. Fold up on the front and back.

35. Fold the corner. Do not repeat at the back.

36. Turn it up.

37. Fold down and repeat from behind.

38. Fold down.

39. Decline.

40. Fold it inside.

41. Fold down. Repeat from behind.

42. Fold up and repeat from behind.

43. Fold inside. Do the same on the other side.

44. Lift the layer and repeat from behind.

45. Fold along the lines and repeat from behind.

46. ​​Fold to the right, repeating the actions on the other side.

47. Fold the fin down and repeat from behind.

48. Fold down and do the same from behind.

49. Bend down, aligning the dots. Repeat from behind.

50. Fold the lines inward.

51. Fold the corners in and repeat from behind. Fold and straighten the right corner.

52. Fold by combining points. On the right side, pull the layer upward.

53. Expand to the left. Fold inwards so that point A passes through line B-C.

54. Turn the left side up and flip the origami figure.

55. Turn the left side up. Turn your head from both sides down.

56. Turn the interior down and repeat from behind. Then turn over the figure.

57. Fold the fins, pulling them to the right in front and behind. Tuck the tail down.

58. Fold your head inwards and turn over the figure.

59. Fold the tail up. Turn out the inside so that the part protrudes slightly.

60. Hide the tail part inside. Fold part of the head up and repeat from behind.

61. Fold the front and back.

62. Bend to the line and repeat from behind.

63. Fold to the right and repeat from behind.

64. Lift the corners upward, repeating the same from behind.

65. Barracuda origami is ready.

Pay attention to: